14
15
仮
Improperly inserted
Properly inserted
The markings on the
left and right sides
are completely visible
Markings are hidden
Release Buttons
(Left and right sides)
Heat Shield Plate
Plate Sensor
Cap
Heater
Receptacle
Mouth for
Receptacle
Lid Knob
Before inserting the Power Plug, make sure that the OFF position is aligned with the Operation Light.
2
●
This product is a cooking utensil for baking, steaming, and cooking as described in the Recipes.
Do not use this product for any other purpose.
●
Before use, wipe the Lid and plates clean with a soft dry cloth.
(1) Attach the Heater Set to the Main Body Guard.
(1) Insert the Probe of the Temperature Control Plug completely and securely.
(2) Insert the Power Plug into an electrical outlet.
(2) Attach the Deep Plate (or Grilling Plate) to (1).
●
Attach the Receptacle of the Heater Set to the Mouth
for Receptacle on the Main Body Guard.
●
When removing the Temperature Control Plug, pull it out while holding the Release Buttons
on the left and right sides.
●
Insert the Temperature Control Plug completely and securely
so that the white semicircular
markings on the Release Buttons (2 places, one on each side) are both completely visible.
If the plug is not inserted fully, the plate may not warm up. Additionally, abnormal heat
generation from the Temperature Control Plug may cause accidents or malfunctions.
●
Please be sure to install the parts in the correct order.
(Incorrect installation may cause fire, burns, and malfunction)
●
If the plate is not attached securely, the Temperature Control
Plug cannot be inserted.
1
Preparation
Deep Plate
Grilling Plate
Lid
２
1
●Do not remove the Rubber Feet from the feet.
Lid and Lid Knob become hot during cooking.
Use oven mitts or similar tools when removing the Lid.
Do not handle the plate roughly,
such as hitting or dropping it.
The plate removes excess fat so
that tastier Yakiniku, steaks, etc.
can be cooked.
Rubber Feet
(2 locations)
Release Buttons
Operation Light
Temperature Control Dial
Power Cord
Probe
Temperature Control Plug
Twist Tie
Handles
(2 locations)
●Please remove the Twist Tie holding the Power
Cord before use.
●Do not use the Power Cord bundled up.
(Doing so may cause the Power Cord to become
excessively hot, resulting in malfunction.)
●A metal spatula is not included with this product.
BX200002G-00
BX200003G-00
(Diamond-cut dimple finish)
(Diamond-cut dimple finish)
When making pancakes, etc., the
diamond-cut dimple finish will
appear on the surface.
PARTS NAMES
HOW TO USE
REPLACEMENT PARTS
Main Body Guard
Heater Set
Main Body Guard (back side)
●Replacement parts may be available for an additional charge.
Please replace damaged parts only with new parts.
●When replacing parts, please record the model number and part
name beforehand. Then contact the retail store where you
purchased the product
or Zojirushi’s specified service center.
Part Name
Part Number
Deep Plate
Grilling Plate
Receptacle
Mouth for Receptacle
Deep Plate
Heater Set
Main Body Guard
Inserting the Temperature Control Plug
Main body
Power Plug
