11
10
DISPOSE WATER
CLEANING AND MAINTENANCE
Automatic Shut-Off Function
Allow the Inner Container to cool, fill with water then press the
ON button again. (Doing so may cause scalding.)
All repairs and other services should be performed by an authorized service representative.
Inner Lid
Inner Container
Receptacle/Connector
/Power Cord/Power Plug
Inner Lid
Receptacle
Body
/
Upper Lid/Power Base
Do not plug or unplug the Power Plug or touch the Connector with wet
hands. (Doing so may cause electric shock or injury.)
When opening the Upper Lid, be careful with the loose water from the
Steam Vent or the Upper Lid splashing on your hands. (Doing so may
cause scalding.)
Do not allow hot water to splash on the Control Panel, Body or the bottom
of the Body. (Doing so may cause scalding or breakdown.)
Dispose the water at least once a day. (Leaving water in the Inner
Container can accumulate scale.)
If the product is switched ON without filling the Inner Container with water, the
Automatic Shut-Off function activates and the power is shut down and the Boil Light
turns off.
Remedy
Remove the Body from the Power Base by holding the Handle and tilt
it to discard hot water from the Spout.
Discard left over water after each use,
emptying the Inner Container completely.
NOTE
NOTE
●
●
●
●
Do not turn the product upside down if the bottom is wet. (Water may get inside
the body and cause it to break or rust.)
Do not use a thinner, benzene, abrasive cleansers or brushes (nylon/metal), bleach or
anything that may damage the surface of the product. (May cause damages to the Inner
Lid and the Inner Container.)
Do not use a dishwasher for cleaning or drying. (May cause the plastic parts to deform.)
Before storing the product for a long period of time, dry it completely and pack in a plastic
bag to prevent odors from developing.
Inner Container
Especially when...
Wipe clean with a well-wrung soft cloth.
Wipe with a soft wet sponge.
Wipe clean with a soft dry cloth.
Never wash the product under running
water, nor immerse it in water. Do not
allow water to splash on the Control
Panel, Receptacle and Connector. (Doing
so may cause water to get inside the
product, resulting in malfunction or rust.)
Perform the Citric Acid Cleaning (see
pg.13) periodically.
Red rust-like spotting is visible on the
Inner Container.
Milky white or gray discoloration and/or
filmy objects are found in the water.
(The condition of the Inner Container will
vary depending on the water quality and
frequency of use.)
●
●
●
●
●
●
●
Upper Lid
Body
When discarding
hot water, be
careful with hot
water or steam to
avoid scalding.
Connector
Power Cord
Power Plug
Power Base
NOTE
NOTE
