20
Stitch Length Adjustment
The numerals on the machine pulley scale
represent the stitch length(mm) however the
actual stitch length will vary depending on
the type and thickness of material being used
.
CAUTION
1
2
3
Open the front cover
.
While pressing the feed adjustment button
,turn the machine pulley toward you slo-
wly,(The feed adjustment button will m-
ove further inward.)
While still pressing the feed adjustment b-
utton ,keep turning the machine pulley
until the desited numeral appears in the c-
enter of the pulley cover windows .
*
The higher the value of the numeral, the la-
rger the stitch length becomes.
Release the feed adjustment button .
(Check that the feed adjustment button p-
ops back out again.)
Close the front cover.
3
3
1
1
1
2
1
2
1
1
NOTE
Do not press the feed adjustment button while the machine is operating,as doing so may damage the
machine parts.
When sewing with the stitch length set close to the maximum length,you will need to adjust the nee -
dle guard in accordance with the type of material and the type of thread being used.
Summary of Contents for ZJ927 Series
