ZOJE ZJ927 Series, Instruction Manual

Page: 20 / 100

15
Insert the rubber plug and then close the
front cover
.
Add 1-2 drops of oil once a weed to needle
bar bracket lubrication hole .
Periodically loose the oil drain screw to
drain out any oil which collects the front
bed oil sump.After draining the oil,tighten
the oil drain screw .
Periodically wipe away any oil which col-
lects in the rear bed oil sump with a cloth.
Turn the machine pulley,so that the oil hole
cover is facing upward,and then remove
the oil hole cover and fill the oil tand
with oil.
Attach the oil hole cover .
If the machine is being used with the puller
attached, remove the cover screws and f-
ill with oil until the level reaches the upper
reference line in the oil sight glass.
If the oil level drops to the lower reference
line, be sure to add more oil.
After lubrication is completed,tighten the c-
over screws .
Checking the machine pulley rotating direction
Do not touch any of the moving parts or place any objects against the machine while
sewing,as this may result in personal injury or damage to the machine.
7
8
9
Upper
reference
line
Lower
reference
line
2
1
2 1
4
5
5
6
7
7
8
CAUTION
Use only the lubricating oil