Caution:
1.To prevent the unexpected startup
of sewing machine, trim
off the pow
er supply before the operation is conducted.
2.After adjusting,check that the needle moves down into the
center of the groove in the presser foot.
②
Fig.28
①
-18-
21
Adjustment of The Knee Lift Height(Fig. 28)
1.Turn the machine pulley so that the feed
dog is below the top of the needle plate.
2
.Lower the presser foot by using the lifting
lever.
3.Unscrew the nut
①
and rotating the screw
②
are the purpose to adjust the height of pres
-ser foot when the knee totally pushed to the
touch point (by knee, the standard height:10
mm , the maximum height :13mm)
4.Securely tighten the nut
①
.
Caution:
1.To prevent the unexpected startup
of sewing machine, trim off the pow
-er supply before the operation is co
-nducted.
ZOJE Europe 2022
