Lifting of presser foot(Fig. 15, Fig. 16)
12
1.Lift presser foot controlled by hands
1)
Shut down the machine, turn presser foot
lever
①
in direction A to uplift the presser foot
(for about 5.5 mm).
When presser foot lever
①
is turned in di
2)
-rection B, presser foot will be returned to its
original position.
2.Lift presser foot controlled by knees
1
)
The presser foot
③
can be raised by pres
-sing the knee lifter plate
②
.(Height of presser
lifting is relate to the degree of knees pressing)
Caution: standard and maximal lifting heigh
-t of presser foot are respectively about 10mm
and 13mm when pressing knees fully.
2
)
The lifting presser foot
③
lowers as soon
as loosing the knee lifter plate
②
release.
Fig.15
Fig.16
②
③
13
Adjusting the Stitch Length(Fig. 17)
Press needle gauge knob
①
and rorate it a
-ccording to arrows,do not release it until the
the number you require aim at A direction right
above machine head,Loose needle gauge kn
-ob
①.
①
A
B
①
-11-
Caution:
1.Scale mark digits are expressed on
the knob in millimeters.
2.Press the reverse feeding wrench
②
towards B direction and rorate nee
-dle gauge knob
①
when changing th
-e scale of it from largest to smallest.
ZOJE Europe 2022
