III
.安装
/INSTALLATION
★危险
:
搬运缝纫机时,请至少
2
人以上进行。
★
WARNING
:
To prevent possible accidents caused by fall of the sewing machine,
perform the work by two persons or more when the machine is moved.
(
1
)板的安装
/Set-up of the table
1
)把控制箱 、电源开关 、固定到台板 上。
2
)用固定条把电源开关 的电缆线固定起来。
3
)把底座锁紧螺钉⑩(
4
个)穿过底座 。
4
)把减震橡胶安装到台板的底座固定孔 (
4
处)
,然后固定底座 。
5
)把机头支撑杆 固定到台板 上。
6
)把缝纫机主机放到台板 上后,把踏板和踏板开关 和附件的连接杆 连接起来。
注意:请调整踏板位置,不让连接杆 和控制箱 相碰。
1) Securely install control box
and power switch
on table .
2) Securely fix the respective power cables of power switch
.
3) Pass four bed base fixed screws (10)through bed base .
4)
Set rubber cushions (5)to holes (6)and then fix on the base.
5) Fix head support bar
on table .
6) After placing the sewing machine main unit on bed base ,connect pedal
T o pedal switch
,connecting rods
which have been supplied as accessories .
►
CAUTION
:
Adjust the positions of the pedals so that connecting road
and control
do not come in contact with each other.
6
Summary of Contents for 5780BS
