E-8
2. Rotate the TUNING CONTROL to your desired radio station according to the DIAL
SCALE on the unit.
3. Rotate the VOLUME CONTROL to adjust to the desired output level.
4. To turn off the radio, press the Power button.
TIPS FOR BEST RECEPTION
AM – The AM antenna is located inside the cabinet of the unit. If AM reception is weak,
change the position of unit until the internal antenna picks up the strongest signal.
FM – If a stereo broadcast program is being received, the FM STEREO INDCATOR will
light. During FM reception, always keep the FM TELESCOPIC ANTENNA fully
extended for best performance. However, if FM reception is weak, try repositioning
the unit near an open window until you get the best reception.
CD OPERATION
NOTE: This unit not only plays commercial compact discs but also self-complied CD-RW
discs.
Because of non-standardized format definition/production of CD-R/RW, playback
quality & performance is not guaranteed.
Manufacturer is not responsible for the playability of CD-R/RW due to recording
conditions such as PC performance, writing software, media properties etc.
Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a
malfunction.
PLAY MODE
1. Slide the FUNCTION SWITCH to the “CD” position.
2. Open the CD DOOR, load a CD with the label side facing upward and then close the
CD door.
3. Disc information (total number of tracks) will appear on the LED DISPLAY.
4. Press PLAY/PAUSE BUTTON to start playing the CD, the PLAY INDICATOR will light
appear on the LED display.
5. While playing music, press the PLAY/PAUSE BUTTON to pause playback and the
PLAY INDICATOR will blink on the LED display. Press PLAY/PAUSE BUTTON again
to resume playing.
6. Adjust the VOLUME CONTROL to the desired volume level.
7. Press STOP BUTTON to stop playing music.
8. To turn off the CD player, press the Power button.
NOTE: If skipping occurs during CD playback, try turning the volume down. Check the
CD to ensure it is not scratched or damaged.
Do not open the CD DOOR when a CD is playing.
REPEAT MODE
Repeat 1
When the REPEAT BUTTON is pressed once, the repeat LED INDICATOR will blink
continuously on LED display. The current track will be repeated.
Repeat All Tracks
When the REPEAT BUTTON is pressed twice, the REPEAT LED INDICATOR L light will
stay solid. The whole disc will be played continuously.
To Cancel Repeat Function:
Press the REPEAT BUTTON until the REPEAT LED INDICATOR light is off.
