E-9
SKIP AND SEARCH MODE
1. During Play or Pause mode, tap the SKIP FORWARD "
" or SKIP BACKWARD "
"
Button to go to the next track or go back to the beginning of the current track.
2. During playback, press and hold the SEARCH FORWARD "
" or SEARCH
BACKWARD "
" Buttons to search within the current track with audible high speed
playback.
PROGRAM PLAY MODE
This function allows music tracks to be played in a programmed sequence.
NOTE: Program can only be set in STOP mode.
1. Press the PROGRAM BUTTON once. “01” in the LED DISPLAY will start to flash.
2. Press the SKIP FORWARD "
" or SKIP BACKWARD "
" BUTTON to select the track
to be programmed.
3. Press the PROGRAM BUTTON again to store the selection. The LED DISPLAY will
advance to “02” and flash to prompt for the next track.
4. You may repeat steps 2 to 3
to program up to 20 tracks. As soon as you have entered
the 20th track, the LED DISPLAY will automatically show the programmed tracks one by
one in their correct sequence starting from the first programmed track. If you wish to
program less than 20 tracks, press the Program button twice after confirming your last
track. At the end of the sequence, "01" will flash on the LED display, ready to play your
first programmed track.
5. Press PLAY BUTTON to start the programmed playback. Press the Stop button to stop
playback.
6. Programmed tracks will be played through once and then stop. However, you may use
the REPEAT function to repeatedly play a certain track (Repeat 1) or all tracks in the
program (Repeat All). You may also press SKIP Forward "
" BUTTON to go directly
to other tracks ahead or use SKIP BACKWARD "
" BUTTON to go back to previous
track(s) during program playback.
7. To cancel program play, press the STOP BUTTON twice during program playback.
AUX IN OPERATION
This player features an AUX-IN jack for connecting your smartphone, MP3 player or other
digital music player.
1. Connect the Aux-in cable(not included) from your external device to the AUX IN jack
located on the left side of this CD player.
2. Turn on the CD player and it will enter the CD/AUX function mode once an external
device is plugged into the AUX IN jack.
3. Start to play your music from the external audio device.
4. Adjust both volume controls on your CD player and on the external device to your
desired level.
NOTE:
Once a cable is plugging into the AUX-IN jack, the CD player will automatically
enter the AUX-in mode. Remember to disconnect the cable from the Aux-in jack after use
in order to be able to use CD function.
BLUETOOTH OPERATION
Pairing with other Bluetooth source devices:
1
.
Slide FUNCTION SWITCH SELECTOR the Bluetooth mode.
2. Press “STOP” button long time to change to select Bluetooth function. (PAIRING indicator blinks.)
