BEFORE OPERATION NOTES ON SET
Beware of condensation
When water vapour comes into contact with the surface of cold material, water drops are produced.
If condensation occurs, correct operation may not be possible or the unit may not function correctly.
This is not a malfunction however, and the unit should be dried (To do this, turn the POWER switch ON and leave the unit
as it is for several hours.)
Be especially careful in the following conditions.
1.
When the unit is brought from a cold place to a warm place, and there is a large temperature difference.
2.
When a heater starts operating.
3.
When the unit is brought from an air-conditioned place to a place of high temperature with high humidity.
4.
When there is a large difference between the internal temperature of the unit and ambient temperature, or in
conditions where condensation occurs easily.
Protect your unit/set from rain, fire, moisture, sand, dust, chemicals & excessive heat (e.g. Near heating equipment or
in car parked under the sun light.)
LOCATION CONTROLS OF UNIT
FRONT VIEW
TOP VIEW
