* To complete programming and start playback, short press “PLAY/PAUSE” button, program playback starts automatically.
*To terminate programming, short press “STOP” button twice to cancel the program mode.
USB/SD CARD OPERATION
*DON’T have compact disc in CD compartment.
1, Set the “FUNCTION” selector to CD/USB position.
2, Insert a USB/SD Card to the USB jack or SD slot
3, The operation of PLAY/PAUSE, STOP, SKIP-, SKIP+, REPEAT and PROGRAM is the same as CD/MP3.
4, Press “STOP” button long time changing USB and SD mode.
*Have compact disc in CD compartment.
1, Set the “FUNCTION” selector to CD/USB position.
2, Insert a USB/SD Card to the USB jack or SD slot
3, Press “STOP” button long time to change CD to USB and SD mode
4, The operation of PLAY/PAUSE, STOP, SKIP-, SKIP+, REPEAT and PROGRAM is the same as CD/MP3.
AUX OPERATION
1, Connect the output cable of any device into AUX jack (3.5mm) located the left side.
2, Set the “FUNCTION” selector to “AUX/OFF” position, adjust the “VOLUME” control to the desired level reception and play
from speaker.
RADIO OPERATION:
1, Set the “FUNCTION” selector to RADIO position.
2, Select the desired radio frequency band by using the “BAND” selector.
3, Turn the “TUNING” control to select the number on the DIAL to the station frequency as desired.
4, Adjust the “VOLUME” control to the desired volume level.
*FM & FM-STEREO reception
1, Set the “BAND” selector at the FM position, programs are received in mono mode, in particular when stereo signals are weak, it
is preferable to receive the program in mono.
2, Set the “BAND” selector at the FM ST. position for receiving stereo programs, the STEREO indicator lights up to show FM
stereo program.
*ANTENNAS
FM: Telescopic rod antenna, extend the rod antenna to improve reception.
AM: The built-in ferrite antenna is directional, rotate the unit until the best reception is obtained.
