background image

Product information presented 

here reflects conditions at time 

of  publication. Consult factory 

regarding discrepancies or 

inconsistencies.

MAIL TO

:  P.O. BOX 16347 • Louisville, KY  40256-0347

SHIP TO

:  3649 Cane Run Road  • Louisville, KY  40211-1961

TEL

: (502) 778-2731 • 1 (800) 928-PUMP • 

FAX

: (502) 774-3624

Visit our website:

zoellerpumps.com

© Copyright 2021. All rights reserved.

Model Number: ________________________________________

Job Name: ____________________________________________

Distributor: ____________________________________________

Date of Purchase: ______________________________________

Contractor: ____________________________________________

Date of Installation: ____________________________________

System Readings During Operation: Voltage _____ Amps _____ 

Congratulations on the purchase of this Zoeller Pump Company 

Recirculating  Media Filter. This system will provide years of 

trouble-free service when installed and serviced according to the 

manufacturer’s recommendations.

This manual incorporates the installation, operation, maintenance, 

and service instructions into one document to aid in the ownership 

of a Zoeller Pump Company  Onsite Treatment System. Please 

read and review this manual before installing the product. Follow 

the steps and procedures listed within for a proper start-up. 

Many items contained within, when followed correctly, will not 

only ensure a long and problem-free life for the system, but 

also save time and money during installation.  Should further 

assistance be necessary, please call Zoeller Pump Company at 

1-800-928-7867.

Table of Contents

Safety Instructions ........................................................................1

Limited Warranty ...........................................................................2

Troubleshooting & Service Checklist........................................2

Preinstallation Checklist .............................................................3

Gravity Discharge System Installation .................................. 4-6

Pump Discharge System Installation .................................... 7-9

System Start-Up ...........................................................................10

Operation & Maintenance .........................................................11

Safety Instructions

TO AVOID SERIOUS OR FATAL PERSONAL INJURY OR MAJOR 

PROPERTY DAMAGE, READ AND FOLLOW ALL SAFETY  

INSTRUCTIONS IN THIS MANUAL AND ON THE PUMP.

THIS MANUAL IS INTENDED TO ASSIST IN THE INSTALLATION 

AND OPERATION OF THIS UNIT AND MUST BE KEPT WITH 

THE PUMP.

This is a 

SAFETY ALERT SYMBOL.

When you see this symbol on the pump or in the 

manual, look for one of the following signal words 

and be alert to the potential for personal injury or 

property damage.

Warns of hazards that 

WILL 

cause serious personal    

injury, death or major property damage.

Warns of hazards that 

CAN

 cause serious personal 

injury, death or major property damage.

Warns of hazards that 

CAN

 cause personal injury or 

property damage.

INDICATES SPECIAL INSTRUCTIONS WHICH ARE 
VERY IMPORTANT AND MUST BE FOLLOWED.

THOROUGHLY REVIEW ALL INSTRUCTIONS AND WARNINGS 

PRIOR TO PERFORMING ANY WORK ON THIS PUMP.

MAINTAIN ALL SAFETY DECALS.

CAUTION

Owner’s Information

REFER TO WARRANTY ON PAGE 2.

SECTION: C3.20.140

CL0064

0321

Supersedes

0515

Recirculating Media Filters

OWNER'S MANUAL

Register your 

Zoeller Pump Company Product 

on our website:

http://reg.zoellerpumps.com/

Summary of Contents for N153













Reviews: