4
© Copyright 2015 Zoeller
®
Co. All rights reserved.
SK2921
1. With basin installed in floor, remove cover from basin.
2. Remove M53 pump and M53 with backup pump from cartons.
3. Thread all power cords through cord hole in cover and insert cords in
3-hole cord seal. Place lubricant on O.D. of cord seal and insert into cover.
4. Put M53 pump cord through appropriate cord hole in cover and insert cord
in 1 hole cord seal. Place lubricant on O.D. of cord seal and insert in cover.
NOTE:
Adjust cords as necessary to eliminate interference of cords
with floats, switches, etc.
5. Place pumps in basin oriented as shown in Fig. 2.
6. Assemble PVC pipe coupling to the backup pump discharge pipe and
insert 1.5" pipe x 15" long in coupling by solvent welding (PVC glue). See Fig. 1.
7. Assemble 1.5" MPT x 1.5" socket adapter to M53 pump discharge (Fig.1).
8.
Assemble PVC pipe (1.5" x 32" long with weep hole) in adapter by solvent
welding (Fig. 1).
9. Assemble cover to basin making sure that discharge pipes align with
appropriate holes in cover. See Fig. 3. Attach vent using 3" NPT flange on
cover. Use full-size discharge pipe.
10. Refer to Installation Instructions FM2562 for additional details pertaining to
the "Pro Pak" System.
NOTE:
Cover must be oriented per instructions (Fig. 3). Basin must be in
accordance with applicable codes and specifications. Pump must be level
and float mechanisms clear of sides of basin before starting pump. Basin
must be clean and free of debris after installation.
INSTALLATION INSTRUCTIONS FOR 24 X 30 DUPLEX BASIN ASSEMBLY
10 1/2
30
1 1/2 DISCHARGE
(2) PLACES
2 1/2 HOLE FOR
3-HOLE CORD SEAL
2 1/2 HOLE FOR
1-HOLE CORD SEAL
3" VENT FLANGE
INSPECTION HOLE
FIG. 3
24" COVER
FIG. 1
FIG. 2
APPROX.30°
PUMP STAND
SOLVENT WELD HERE
SOLVENT WELD HERE
4" INLET HUB
3/16 DIA. WEEP HOLE
MAIL TO: P.O. BOX 16347 • Louisville, KY 40256-0347
SHIP TO: 3649 Cane Run Road • Louisville, KY 40211-1961
(502) 778-2731 • 1 (800) 928-PUMP • FAX (502) 774-3624
Visit our web site:
zoellerpumps.com