6
© 2017. All rights reserved.
4. Make sure your hands are dry and you are
not standing in water. Connect the pump to a
properly-grounded, GFCI electrical outlet.
WARNING:
Do not use an extension cord.
NOTE:
Tape the electrical cord to the discharge
pipe to prevent it from interfering with the
motion of the float.
5. Test the operation of the pump by pouring water
into the sump basin.
6. Install a sump basin cover to complete the
installation.
A
A
Sump basin
cover
6
115 V
GFCI Outlet
5
115 V
GFCI outlet
4
INSTALLATION INSTRUCTIONS
