Zoef Robot Hendrik-Jan MR13Z, Manual

Page: 94 / 102

2.4.Select
“Set PIN code”
to set 4 numbers start password, screens as below:
--- Enter pin code: input original password,
--- Enter new pin code: to input new password,
--- Confirm new pin: to input new password again.
---When it shows PIN accepted , it means new password
has been accepted, and will return automatically;
---In case the password was input incorrectly, the screen
will show: PIN not accepted . Press to return the upper menu to reset.
2.5. Set Time & Date screen shows as below:
--- Select Set time to set standard time in user
’
s country, press
to confirm, press to return.
---Select
Set date
to set date, press to confirm, press to return.
---Select
Set format
to set time format as 12 hours or 24 hours,
24 hours will be the default setting if do not specify. Press
to confirm, and press
to return.
2.6. Use
“ “t
o return to the main menu, start the mower to work.
2.7 Sub-area setting
Sub-area setting is to increase the working efficiency of the mower in large areas.
Also, it helps the mower to go through narrow passages from one area to another. Without this
function, the mower trends to mow the area that near charging station but ignore the one in the other
side of the narrow passage
–
due to fence line signal problem of the narrow passage, the mower may
not pass.
Divide the lawn into 2~3 small areas and ask the mower to work on each area one by one. This
function must work together with appointment function.