Zoef Robot Hendrik-Jan MR13Z, Manual

Page: 92 / 102

Operation
Operation Instruction for Robot Mower LED Display Screen
1. Operation of Display Screen
Press the power button" ", the screen shows
“
ENTER PIN CODE
”,
input initial password (0000)
to enter the operation interface( As per Figure 1):
1.1 Press START to turn on the mower: put the mower on the fence and the mower head is
clockwise to the charge station: ( As per Figure 2):
1.1.1 Put the mower in front of the charging station, distance within 50cm, press “start”, when the
extruding poles of the mower touch the paddles of the charging station , the indicator light on the
charging station turn to red, then mower go off the fence and start to mow.
1.1.2 Put the mower at the end of the charging station, press “start”, the mower will mow along the fence
line first, and then touch the charging station, the indicator on the charging station turn to red, mower go
off the fence and start to mow.
1.2 Press MENU to set function
1.3 Press HOME to direct the mower back to the charge station
Commonly used in the following situations
1.3.1 To stop the mower during mowing: Press “HOME” to stop, mower will go back to the charging
station. In this condition, the blades stop, and mower go back to charging station for charging. After
fully charged, mower won’t start by it self, have to re -start.
1.1.2To cut the grass on the two sides of the fence: Turn off the mower, then put the mower at the end
of the charging station, press “start”, the mower will mow along the fence line first, and then touch
the charging station, the indicator on the charging station turn to red, mower go off the fence and
start to mow.
2. Functional Settings
。
2.1 Press MENU to enter functio n “ SETTINGS ” , the screen shows as below:
SETTINGS
Set area
Set an appointment
Set PIN code
Set time & date
Language