18
3.3.3 Configuring pool shutter mode
The pool shutter mode is used to adapt the dehumidifier and heating functions to the pool status (covered/not
covered).
When the shutter is detected as closed, the heating setpoint temperature switches to the (lower) point defined in
setting P66 (see § 3.4.3 "Configuring setpoint temperatures").
This setting helps to reduce energy consumption during periods when no one is swimming.
Uncovered
Setpoint T (°C) = 28°C / P07
Covered
Setpoint T (°C) = 20°C / P66
This example shows the temperature setpoint automatically switching from “P07” = 28°C to “P66” = 20°C when the pool is covered.
To activate this function you will have to:
1.
First connect the pool shutter switch (see §2.5.1 "Connecting the pool shutter switch");
2. Activate the pool shutter mode:
•
In the “EASY” menu, browse with the
or
keys until you reach the “P67” setting, then press
SET
to
confirm.
• Using the
or
keys, select:
- Yes = activate the automatic shutter mode (default setting).
- No = deactivate the automatic shutter mode.
• Press
SET
to confirm.
• Press
to go back to the previous screen.
Press
a number of times to return to the home screen.
Information: advantages of the pool shutter function
•
When the shutter is detected as fully closed no more pool water can evaporate. The dehumidification
function is then automatically deactivated.
•
If a dehumidification process is ongoing when the pool is covered, the function will only be deactivated
once the humidity setpoint has been reached.
Summary of Contents for WD002088
Page 2: ......
Page 13: ...11 2 4 I Access to the electrical connection terminal boards EN...
Page 35: ......