Zodiac WD002088, Instructions For Installation Manual, Page: 18 / 36

16
3.2.2 Starting the appliance
• Press and hold (longer than 3 seconds) .
• The screen displays all of the symbols along with an audible beep. The value displayed on the screen corresponds
to the relative humidity (%). The ambient temperature can also be simultaneously displayed (°C). To do this, just set
the heating mode to "Hetr" or "coiL". (see §3.3.2 "Configuring the heating mode").
3.3 I Appliance configuration
When the dehumidifier is installed, it must be configured to ensure optimal operation best adapted to the conditions of
use. This can be done via the "EASY" menu (access reserved for qualified professionals and requiring an access code).
To access and browse the menus:
• Press and hold (longer than 3 seconds) SET .
• Browse using the and keys.
• Press
SET
to confirm (go to a sub-menu or confirm a selection).
• Press to go back to the previous screen.
Information: list of menus
Menu Description Restriction
USER Menu dedicated to users for managing setpoints /
EASY
Menu intended for qualified professionals so that they can configure
the appliance after the initial installation and/or adding an option.
Reserved
for qualified
professionals and
requiring an access
code.
INIT PARA
Information menu dedicated to the appliance's status and basic
settings
ADVI
Menu dedicated to the appliance's advanced settings (“Read” mode)
ADVDr Menu dedicated to the appliance's advanced settings (“Write” mode)
3.3.1 Configuring the ventilation mode
• In the “EASY” menu, browse with the or keys until you reach the “P16” setting, then press SET to
confirm.
• Using the or keys, choose the desired ventilation mode:
- 0 = intermittent ventilation. The ventilation comes on every 30 seconds for 5 minutes.
- 1 = permanent ventilation (default setting). The ventilation is always on.
• Press SET to confirm.
• Press to go back to the previous screen.
Press a number of times to return to the home screen.