12
3.5 I Starting the cleaning cycle
To prevent all risks of injury or equipment damage, comply with the following directives:
•
Bathing is prohibited when the appliance is in the pool.
•
Do not use the appliance during shock chlorination.
•
Do not leave the appliance unattended for an extended period.
•
Do not use the appliance if the roller shutter is closed.
•
When the control box is powered up, the following symbols light up to indicate:
-
The action in progress
- The cleaning mode selected
- that maintenance is required
•
The control box switches to standby after 10 minutes and the screen is switched off. Press any key to exit standby
mode. Standby mode does not stop the appliance if it is in a cleaning cycle.
3.5.1 Cleaning cycle selection (depending on model)
•
A cleaning cycle is already configured by default: the symbols are on and the cleaning time appears on the screen, for
example:
(depending on the model).
•
The cleaning cycle can be selected at any time, before the appliance starts or while it is operating. The new cycle will
be launched instantly and the remaining time countdown will be reinitialised.
•
The cleaner adapts its movement strategy depending on the choice in order to optimise coverage.
Surface to be cleaned
Pool shape
Cleaning intensity
Bottom only
Other shapes, other bottoms
Low intensity
walls + water line
Flat bottomed rectangular
Intensive
Water line only
3.5.2 Launching the cleaning cycle
• Press
Tip to improve cleaning performance
At the start of the bathing season, launch several cleaning cycles in bottom-only mode (after removing large
debris with a net).
Regular use of the cleaner (without exceeding 3 cycles per week) means that your pool will always be clean
and the filter less clogged.
3.5.3 Adjusting the cleaning time (depending on model)
•
You may reduce or increase the time for the cleaning cycle selected or in progress:
-
:
Reduce by 30 minutes.
-
:
Increase by 30 minutes.
• Press
to confirm.
EN
Summary of Contents for Vortex EC11
Page 2: ......
