![background image](http://html1.mh-extra.com/html/zodiac/t5-duo-suction/t5-duo-suction_installation-instructions-manual_4087319007.webp)
•
Immerse the hose and the cleaner and assemble the elements
underwater.
•
Fit the assembled hose (
see paragraph 2 page 16
: fitting
the hose) with the quick connection fitting
(Figure 12)
.
To assemble them correctly make a quarter turn and position
the tabs in one of the slots. You do not need to fit the tab in the
last housing when using the cleaner at first.
•
If needed; if you have ladders or areas that might jam
your cleaner, clip the non blocking wheel to the end of the hose
(Figure 12)
.
•
Then clip the assembly to the cleaner nozzle
(Figure 13)
.
•
A counter-weight is supplied to be used when the T5 Duo
tends to rise from the bottom of the pool
(Figure 14)
.
Fit the counterweight to the end of the first hose section at about
1 metre from the appliance
(Figure 15)
then make sure that
the disk remains on the bottom of the pool when the appliance
is operating.
5 / Hose and cleaner assembly
2 0
Figure 12
Figure 13
Figure 15
Figure 14
incorrect
incorrect
correct