15
4.3.3 Reassembling the diaphragm
•
Clip the diaphragm inside the internal output hose (see image ).
•
Insert the internal output hose and the diaphragm into the cartridge. Align the diaphragm with the notches and pull
in a straight line (do not twist) until the edge of the diaphragm is visible (see image and ).
•
Screw the external output hose onto the cartridge and tighten (see image ).
•
For the T3 / R3 / B3 models
, check that the seal is still in place inside the nut. Insert the cartridge inside
the body of the cleaner, slide the clamping nut above the external output hose and tighten (see image
).
For the T5 Duo model
, insert the cartridge into the body of the cleaner and tighten the nut (see image ).
•
Check that the external output hose pivots freely by rotating it (see image ).
Internal output
hose
Diaphragm
Cartridge
Diaphragm
Tab
Notch
Diaphragm edge
Cartridge
External output
hose
T3 / R3 / B3
T5 Duo
T3 / R3 / B3
T5 Duo
or
or
EN
Summary of Contents for T3
Page 2: ......