Zodiac SpaBot, Instructions For Installation And Use Manual

Page: 9 / 120

8
EN
Specifications
Anatomy
Turning SpaBot On and Off
ON
To turn SpaBot ON, press down and
release the On/Off button once. The wheels
and brushes will move forward and back
once.The Battery LED will be solid green
and the Info LED will flash green. SpaBot is
now ready to be placed in the spa. SpaBot
will automatically turn off if not placed in the
water.
OFF
To turn SpaBot OFF, press down
and release the On/Off button once. The
Battery LED and the Info LED will turn
off. SpaBot will automatically turn off after
cleaning cycle is complete.
Before starting - This manual (original instructions) contains essential installation
and startup instructions. Read all safety warnings before commencing installation.
Detachable supply unit (external adaptor)
Use ONLY the detachable supply
unit provided with this appliance.
Not intended for use in swimming pools.
Battery Charger
Input:
100-240V, 50/60Hz
0.6A Maximum
Charge
Temperature:
Maximum 40
˚
C
Minimum 5 ˚ C
Water
Temperature
Range:
Maximum 40
˚
C
Minimum 5 ˚ C
Operation Depth:
Maximum 1.6 m
Minimum 25 cm
Filter
access
Charging
Port
Water
Sensor
On/Off
Button
Flashing
Green
On. Not in water
Solid Green Running. In water.
Flashing Red Error
Info LED
Solid Green
Charged.
Ready to run a full cycle.
Flashing
Orange
Charging
Flashing
Orange
Running. Battery low.
Flashes
Orange
(when On/
Off pressed)
Very low battery level.
Charge needed. Cannot
run cleaner.
Flashing
Red
Charging error
Battery LED
Active
Brushes
Pivoting
Float
Lid
Canister
Wheels
Pivot
arm