19
5.3 I Replacing the brushes
•
Each brush is equipped with wear indicators; the distance between the indicators and the end of the brush indicates
whether the brush is in good conditi on (see image )
.
•
The brushes are worn and should be replaced when the wear indicators appear as shown in image
.
•
To remove worn brushes, remove the tabs from the holes in which they are fi xed (see image )
.
•
To fi t new brushes, start by fi tti ng the side without tabs under the brush holder (see image )
.
•
Roll the brush around its support, slide the tabs into the att achment holes and pull on the end of each tab unti l its
edge passes through the slit (see image )
.
•
Cut the tabs using a pair of scissors for them to be level with the other blades (see image )
.
Summary of Contents for RV 5500 iQ
Page 21: ...20 5 4 I Changing the tyres EN...
