10
H0426500.C - EN - 2016-01
3.6 I Ending the cleaning cycle
• Only use the handle to remove the cleaner from the water. Do not lift the cleaner using the
fl oati ng cable.
• Do not leave the device to dry out in sunlight aft er use.
• Store all the elements away from sunlight, dampness and bad weather.
• Switch off the device by pressing
.
• To bring the cleaner to the edge of the pool, pull on the fl oati ng cable.
• When the cleaner is within arm's reach, pick it up by the handle and lift it gently out of the pool so that the water it
contains drains into the pool (see image and )
.
• Place the cleaner verti cally at the locati on provided on the trolley (depending on the model) for it to dry out quickly
(see image )
.
• Then store it with the command box away from sunlight and any splashing. A protecti ve cover is available as an opti on
(see image )
.
Tip: prevent the fl oati ng cable from becoming too entangled
The cleaner's behaviour is strongly impacted by the tangling of the cable. A cable which is correctly untangled
will guarantee bett er coverage of the pool.
• Untangle the cable and lay it out in the sun so that it returns to its original shape.
• Then wind it up carefully and place it on the trolley handle (depending on the model) or on a fi xed
support.
❹ Maintenance
• The device must be cleaned regularly using clean or slightly soapy water. Do not use any solvents.
• Rinse the device generously using clean water.
• Do not let your device dry in the sun by the pool.
Tip: replace the fi lter and the brushes every 2 years
You are recommended to change the fi lter and the brushes every 2 years to preserve the integrity of the
device and guarantee opti mum performance.
EN
