![background image](http://html1.mh-extra.com/html/zodiac/milpro-erb-310-hpp/milpro-erb-310-hpp_owners-manual_936173022.webp)
21 / 26
MAINTENANCE
NOTE:
To be considered for hull maintenance:
A decrease in mechanical properties due to the heat may be observed.
Do not use chemicals or marine paints incompatible with aluminium (check with
your dealer).
Refer to the existing legislation for products used in anti-fouling.
1.4 Maintenance of stainless steel quarterdeck
We select high quality stainless steel which has a reinforced corrosion resistance. However, in a
maritime environment they are subjected to the harsh combined effects of salt and water.
NOTE:
Stainless steel cannot be deteriorated and only requires minimal precautions
and maintenance:
Avoid contaminating it by contact with ferrous tools: Use chromium plated tools.
Avoid scratching the surface.
Rinse frequently with freshwater.
Grease it and regularly restore the protective film with a passivating compound
(refer to your Zodiac Milpro distributor).
Use products recommended by Zodiac Milpro.
1.5 Upkeep of upholstery and other materials
Clean upholstery and marine plywood using freshwater or use products recommended by ZODIAC
MILPRO, and then let dry.
Varnish and paintwork are not just decorative, they also play a protective role. When the surface is
flaking or tarnished, repaint using polyurethane-based products.
1.6 Engine maintenance
The whole outside of the engine and the inside of the cooling system should be thoroughly rinsed.
For further details, refer to the engine manufacturer's manual.
1.7 Maintenance of fuel tanks
If allowed by local legislation, fill up your tanks to the maximum to prevent condensation.
If not, empty your tanks completely.
WARNING
IF THE TANKS WERE EMPTY, MAKE SURE THERE IS NO WATER IN THEM
BEFORE REUSING THE BOAT.
1.8 Electrical system maintenance
•
Make sure that all electrical systems operate properly.
•
Disconnect the battery.
•
Make sure to dry and properly ventilate the electrical compartments.
•
Use a dielectric spray on connectors to protect them from corrosion.