To set the minimum speed, from the service setup menu,
select
SET MIN LIMIT
using the arrow keys. Press
MENU
. Using the arrow keys, set the minimum speed to
the desired value. Press
MENU
to accept and store.
2
3
4
SET MIN LIMIT
RPM: 600
MENU
To set the maximum speed, from the service setup
menu, select
SET MAX LIMIT
using the arrow keys.
Press
MENU
. Using the arrow keys, set the maximum
speed to the desired value. Press
MENU
to accept and
store.
2
3
4
SET MAX LIMIT
RPM: 3450
MENU
4.3 Load Defaults
To restore factory default settings to the controller, from
the service setup menu, select
LOAD DEFAULTS
. Press
MENU
. Using the arrow keys, select
YES
. Press
MENU
to restore factory default settings.
2
3
4
LOAD DEFAULTS
YES
MENU
Default Speeds
eStar
1750 RPM
Speed 2 - 8
2750 RPM
Priming Speed
2750 RPM
Other Defaults
Freeze Protect Duration
30 min
Priming Duration
3 min
4.4 Last Fault
This feature shows on the top display line, the most
recent unique fault message and on the bottom display
line, the second-to-last unique fault message. If there
is no entry for a fault, the display will show “*---------
-------*” on the corresponding line. To select last fault,
from the service setup menu select
LAST FAULT
. Press
MENU
.
NOTE
The fault messages are stored in non-volatile
memory, and remain even with no power. To
clear the fault history, press either arrow key.
2
3
4
SELECT SERVICE SETUP
LAST FAULT
MENU
4.5 Priming Speed and Duration
The controller will command the variable-speed pump
to operate at the priming speed for the priming duration
specified (except during timer program overlaps or
follow-on commands where the pump is not stopped
before changing speeds). From the service setup menu,
select
PRIMING
using the arrow keys. Press
MENU
.
2
3
4
PRIMING DURATION
MIN: 3
MENU
To set priming speed, select
PRIMING SPEED
using
the arrow keys. Press
MENU
. Using the arrow keys, set
the priming speed to the desired value. Press
MENU
to
accept and store.
2
3
4
PRIMING SPEED
RPM: 3450
MENU
PAGE 14
JEP-R Variable-Speed Pump Controller
|
Installation Manual
ENGLISH
