Zodiac iAquaLink, Owner'S Manual

Page: 17 / 68

4.7.4 Boost Setup
Use this screen to adjust the number of hours or mode
of boost pool.
The MODE selection is only available if the DIP switch
S1-3 is in the ON position (Spillover mode).
NOTE All DIP switches are located on the left side of the
AquaLink RS power center bezel.
On the SET CHLORINE PRODUCTION screen, click
the BOOST SETUP button to display the screen below.
Using the numeric keypad, click the CLEAR button to
erase existing hours. Enter new hours. Click ENTER
when finished.
If selecting MODE, click the MODE button and choose
either pool or spillover.
Thu June 23, 2011 3:03 PM
7 8 9
4 5 6
1 2 3
0
Clear Enter
Boost Hours Setup
2:00
Hours
2:00
Mode
Pool/Spillover
Home Menu OneTouch Help Back Status
4.8 Program Group
The PROGRAM GROUP screen allows on and off
times for any equipment controlled by the iAquaLink.
PROGRAM GROUPS are useful for changing between
specific settings for summer, winter, or vacation. The
iAquaLink will store on/off times for equipment in each
group.
Use the PROGRAM GROUP menu to switch between
program group A and program group B. Group A is the
default. PROGRAM GROUP A or B will not appear
unless PROGRAM GROUP has been selected. Confirm
you are in the right program group before programming
equipment.
MENU > PROGRAM GROUP
On the MENU screen, click the PROGRAM GROUP
button to display the PROGRAM GROUP screen.
4.8.1 A and B Groups
Click the GROUP A or B button to manually switch
groups.
Group A
Manually Switch Group
Custom Label
Group
Start
Date
Auto Switch
Disable
Group B
Thu June 23, 2011 3:03 PM
Program Group
Home Menu OneTouch Help Back Status
4.8.2 Program Auto Switch
If you like the Program Groups to switch automatically,
select a group and enter new date using the numeric
keypad. Click SAVE when finished.
7 8 9
4 5 6
1 2 3
0
Clear Enter
Date: 1001
Program Auto Switch
Group A:
10/01
Group B: 04/01
Thu June 23, 2011 3:03 PM
Program Group
Home Menu OneTouch Help Back Status
4.8.3 Custom Label Group
The names of the PROGRAM GROUPS can be
customized using the CUSTOM LABEL screen.
On the PROGRAM GROUP screen, click the CUSTOM
LABEL GROUP button to display the screen below.
Use this screen to enter your new label as explained in
the following section.
Page 17
iAquaLink™ Web Connect Device for AquaLink
®
& PDA Control Systems
|
Owner's Manual
ENGLISH