13
4.4 I Replacing the brush
•
The brush is equipped with wear indicators; the distance between the indicators and the end of the brush indicates
whether the brush is in good condition (see figure )
.
•
The brush is worn and should be replaced when the wear indicators appear as shown in figure
.
•
To remove the worn brush, remove the tabs from the holes in which they are fixed (see figure ).
•
To fit the new brush, start by fitting the side without tabs under the brush holder (see figure )
.
•
Roll the brush around its support, slide the tabs into the attachment holes
and pull on the end of each tab
until its
edge passes through the slit (see figure ).
•
Cut the tabs using a pair of scissors for them to be below flap level (see figure )
.
EN
