INSTALLATION INSTRUCTIONS
CAUTION: ABOVEGROUND POOLS
Steel Bottom Tracks
Salt systems are not suitable for above ground pools with steel bottom tracks. Water from splash
out can accumulate in the bottom track. As water evaporates, salt and other dissolved solids are
left behind. As these materials become more concentrated over time, they can cause damage to
the track which can result in the pool wall collapsing. There are also other pool components that
may be susceptible to similar damage. It is therefore best to contact the manufacturer of your
pool to verify that it is compatible with a salt system. Zodiac will not be liable for any damages
caused by the installation of a Zodiac EZ SALT Chlorine Generating Device on an incompatible
above ground pool.
Synchronization with the Pump
Zodiac EZ SALT Chlorine Generating Device must be synchronized with the pool’s pump to
ensure that when chlorine is being produced, there is adequate water flow to take it to the pool.
As a result, the pump must be plugged into the outlet on the Zodiac EZ SALT Chlorine
Generating Device.
Filter
Pool Pump
Skimmer
Box
Control Panel
Return Line
EZ SaltCell
From the Pump
1. Installing the Cell
a) It is very important that the cell is the
last
piece of equipment before the pool. If it is not, the
chlorine will corrode other equipment. It is also extremely unsafe for the gases produced by
the Zodiac EZ SALT Chlorine Generating Device to travel through a filter or heater.
b) Flexible PVC may be used for the line between the pool filter and the EZ SALT Chlorine
Generating Device.
c) The cell must be installed with the terminals facing up. It is to be fitted to the outside of the
above ground pool wall by connecting it to return eyeball to the wall of the pool.
1.
Fit and glue the adaptor (4) to the pool return fitting ensure the locking ring (5)
is in position before gluing.
2.
Fit the flapper valve (6) to the cell outlet and secure with nut (5)
9
