background image

SAVE THESE INSTRUCTIONS

 

 

CAUTION

Failure to comply with the following warnings could cause damage to pool equipment or personal injury.

•  The robotic cleaner must be installed and operated as specified.

•  This product is intended for use with permanently-installed pools. Do not use with storable pools. A permanent-

ly-installed pool is constructed in or on the ground or in a building such that it cannot be readily disassembled 

for storage. A storable pool is constructed so that it is capable of being readily disassembled for storage and 

reassembled to its original integrity.

•  Clean the filter canister in the Evolux cleaner after each use.

•  Do not use the product in your pool if the water temperature is above 35˚ C (95˚ F) or below 13˚ C (55˚ F).

USE OF THE ZODIAC ROBOTIC CLEANER IN A VINYL LINER POOL

Certain vinyl liner patterns are particularly susceptible to rapid surface wear of pattern removal caused by ob-

jects coming into contact with the vinyl surface, including pool brushes, pool toys, floats, fountains, chlorine dis-

pensers, and automatic pool cleaners. Some vinyl liner patterns can be seriously scratched or abraded simply 

by rubbing the surface with a pool brush. Ink from the pattern can also rub off during the installation process or 

when it comes into contact with objects in the pool. Zodiac Group Australia Pty. Ltd. is not responsible for, and 

the Limited Warranty does not cover, pattern removal, abrasion or markings on vinyl liners.

 

2

 Cleaner 

Specifications

General Specifications

The general specifications for the cleaner are as 

follows:

Control box  

supply voltage 

220-240 VAC, 50 Hz; short 

circuit-proof safety isolating 

type 

Supply voltage

30 V DC

Installed load

150 W max

Cable length

18 M or 21M depending on 

model

Cleaner size 

(WxDxH)

43 x 48 x 27 cm

Weight of Cleaner

9.5 kg

Packed weight

19 kg

Filtration 

All-purpose filter canister

Cycle lengths

Variable programming.

The cleaner is a double-insulated product. A 

double-insulated electrical appliance is one which 

has been designed in such a way that it does not 

require a safety connection to ground. The basic 

requirement for double-insulation is that no single 

failure can result in dangerous voltage becoming 

exposed so that it might cause an electric shock 

and that this is achieved without relying on an 

earthed (grounded) metal casing. This is achieved 

by having two (2) layers of insulating material 

surrounding live parts or by using reinforced 

insulation. Therefore, devices having double-

insulated construction, such as this cleaner, do not 

utilize a grounded (three-prong) cord/plug.

Page

 5 

  

 

Zodiac

®

 EvoluX

 iQ Robotic Pool Cleaner   

|

   Owner's Manual

Summary of Contents for EvoluX iQ Series





























Reviews: