The Ei has 2 ON/OFF timers available, which can be set to enable the
chlorinator (and pump if connected) to run up to 2 times each day.
From the main operating screen, press the
button.
Wait for message to clear
Press the
button to increment the hours setting to the desired
setting (
button can be held to speed up increments).
Press the
button to increment the minutes setting to the desired
setting (
button can be held to speed up increments).
Once a suitable ‘ON’ time is set, press the
button to move to
setting the ‘OFF’ time. (There is a factory preset off time of 3hrs after the
on time, simply adjust if you require more or less)
Repeat steps 2 and 3 to set the desired off time.
1)
2)
3)
4)
5)
6)
SETTING THE
TIMERS
11
For most pools we recommend running your filtration equipment
4hrs in the morning and evening during summer, and 3hrs in the
morning and evening during winter. You may need to adjust this
depending on bather load and climate conditions
If a timer setting has been set, a small ‘T’ symbol will appear in the top right
corner of the screen.
12
1)
2)
3)
4)
From the main operating screen, press the
button
Wait for message to clear
Press the
button, ‘TIMERS CLEARED’ will appear on the screen
Press the
Button to return to the main operating screen
If another ON/OFF timer is required, press the
button to move to
setting the TIMER2 ON time and repeat steps 2 to 5 above. If no further
timers are required, press the
button to return to the main
operating screen.
7)
CLEARING THE
TIMERS
Ei Brochure A4 Spread 090701.indd 12
1/07/2009 2:28:26 PM
