Récepteur à la TV et VCR avec RF
1. Connecter l’antenne de la TV à RF-IN.
2. Connecter RF-OUT du récepteur à RF-In du VCR.
3. Connecter RF OUT du VCR à RF IN de la TV.
4. Connecter la Vidéo et l’Audio de la TV aux prises Vidéo et Audio du récepteur.
5. Consulter la section 3.2 Connexion à la parabole, puis effectuer le raccordement à la parabole.
Récepteur à la TV et VCR avec cordons Péritel
1. Connecter l’antenne TV à RF-IN.
2. Connecter RF IN du VCR à RF-OUT du récepteur.
3. Connecter RF OUT du VCR à RF IN de la TV.
4. Connecter la Vidéo et l’Audio de la TV aux prises Vidéo et Audio.
5. Connecter TV SCART à la TV avec le cordon Péritel actif.
6. Consulter la section 3.2 Connexion à la parabole, puis effectuer le raccordement à la parabole.
Récepteur à la TV, VCR et Décodeur avec cordon Péritel
1. Connecter l’antenne TV à RF-IN.
2. Connecter RF IN du VCR à RF-OUT du récepteur.
3. Connecter RF OUT du VCR à RF IN de la TV.
4. Connecter la Vidéo et l’Audio de la TV aux prises Vidéo et Audio.
5. Connecter TV SCART à la TV avec le cordon Péritel actif.
6. Connecter la Péritel du Décodeur à AUX avec le cordon Péritel actif.
7. Consulter la section 3.2 Connexion à la parabole, puis effectuer le raccordement à la parabole.
3.2 Connexion à la parabole
Parabole
Connecter le câble de l’antenne satellite à LNB IN.
Parabole fixe avec DiSEqC (2)
Connecter la sortie DiSEqC au LNB IN du récepteur.
Connexion d’un câble à fibres optiques S/PDIF
Lorsqu’on regarde un programme en Dolby Digital, il est possible d’obtenir une meilleure qualité du son Dolby
Digital en raccordant STB à un téléviseur ou à un amplificateur Dolby Digital externe. Pour cela, connecter la
sortie optique S/PDIF de STB à l’entrée optique S/PDIF de l’appareil Dolby Digital externe (télévision,
amplificateur, etc.).