Zodiac DT 850, Installation Instructions And Use

Page: 3 / 12

2
1. Installation
1.1 General
Read this manual carefully before installing, maintaining or repairing this appliance!
The symbol indicates important information that must be taken into account in order to
avoid the risk of injury and/or damage to the appliance.
The
symbol indicates useful information.
1.1.1 Precautions
1.1.2 General terms of delivery
Any equipment, even CARRIAGE and PACKING FREE, travels at the addressee's risk. Addressees
must indicate any reserves in writing on the carrier's delivery bill in the case of damage caused during
transport (confirmation to be sent to the carrier within 48 hours by registered mail and
Acknowledgement of Receipt).
Contents:
+
1.1.3 Storage and transport conditions
The appliance must be transported upright on its pallet.
The appliance must be transported upright on its pallet, in its original packaging.
If the appliance has been overturned make written reserves in writing to the transporter.
Removing or shunting any of the safety or remote control parts will automatically
void the guarantee; the same will apply for the replacement of parts by non-original
parts.
Do not discharge R407C fluid into the atmosphere: R407C is a fluorinated
greenhouse effect gas, covered by the Kyoto Protocol, with a Global Warming
Potential (GWP) = 1653 - (Directive EC 842/2006).
Do not insert any objects into the openings.
Never place any conductive parts in contact with water
Before working on the appliance, ensure that it is disconnected from the power
supply.
This device must be installed and serviced by certified professionals approved in
the electrical, hydraulic and cooling domains.
EN