(for Digital mode only)
3
Hold the radio in a vertical position and keep a distance of 2,5 to 5 cm ( 1 to
2 inches) from your mouth;
If the "
Channel Idle Prompt Tone
" function is enabled, when the radio
releases the [PTT] button, you will hear a short beep, indicating that the
channel is free, and waiting for your answer;
4
Note:
When receiving an all call, if you switch to another channel, the radio
will stop receiving the all call. During a all call, you will not be able to use any
pre-programmed buttons until the call ends.
Transmitting under Analog Channel
On the analog channel, press the [PTT] key to transmitting and release the
key to receiving.
All Call
-- All call is a call from an individual radio to all radios on the
channel. It is used to issue important announcements that require special
attention from users.
No
All Call
1
LED indicated green light;
2
The Top line of Screen display icon RSSI, and the display area below the top
line:
First line displays
all call
;
Middle line displays
user ID or name
;
Bottom line displays
icon of all call
(for Digital mode only)
3
Hold the radio in a vertical position and keep a distance of 1 to 2 inches
(2.5 to 5.0 cm) from your mouth;
If the "
Channel Idle Prompt Tone
" function is enabled, when the radio
releases the [PTT] button, you will hear a short beep, indicating that the
channel is free, and waiting for your answer;
4
After the finished all call communication, the radio returns to the screen
before receiving the all-call.