![background image](http://html2.mh-extra.com/html/zodiac/cyclonx/cyclonx_instructions-for-installation-and-use-manual_4031148010.webp)
9
3.5 I Starti ng the cleaning cycle
To prevent risk of injury or property damage, be sure to adhere to the following:
•
Bathing is prohibited when the appliance is in the pool.
•
Do not use the appliance during shock chlorinati on.
•
Do not leave the appliance unatt ended for an extended period.
•
Do not use the appliance if the roller shutt er is closed.
•
When the control box is powered up, the following symbols light up to indicate:
-
The acti on in progress
- The cleaning selected
(depending on model)
- Maintenance required
•
The control box switches to standby aft er 10 minutes and the screen is switched off . Press any key to exit standby
mode. Standby mode does not stop the appliance if it is in a cleaning cycle.
3.5.1 Cleaning cycle selecti on (depending on model)
•
A cleaning cycle is already confi gured by default: the symbols are on.
•
The cleaning cycle can be selected at any ti me, before the appliance starts or while it is operati ng. The new cycle will
start immediately.
•
The cleaner adapts its movement strategy depending on the choice in order to opti mise the coverage rate.
Surface to clean
Bott om only
Bott om + sides + water line
3.5.2 Launching the cleaning cycle
• Press
Tip to improve cleaning performance
At the start of the bathing season, launch several cleaning cycles in bott om only mode (aft er removing the
large debris with a net).
Regular use of the cleaner (without exceeding 3 cycles per week) means that your pool will always be clean
and the fi lter less clogged.
3.5.3 Adjusti ng the cleaning ti me (depending on model)
•
You may reduce or increase the cleaning ti me at any ti me (+/- 0.5 H.
•
Press the butt on:
Durée
normale
-
0.5
H
+
0.5
H
Normal
durati on