2. Installation
For your own safety and to ensure that your CYBERNAUT™
functions properly, proceed as follows:
- Put the control box at least 3.5 metres away from the edge
of the pool avoiding direct exposure to the sun.
- Fix to the ground using the fixing dowels supplied, and lock
the trolley foot into them to immobilise the trolley (diagram 3).
21
1. Unpacking
• The following items should be in the packaging:
- your CYBERNAUT™ robot
- its transport trolley including the control box
• Make sure your appliance has not been damaged in transit (impact, broken parts etc.).
If you notice the slightest defect, however minor, do not hesitate to contact
your retailer before using your CYBERNAUT™.
A S S E M B L I N G T H E T R A N S P O R T T R O L L E Y
• Before removing the appliance from the box:
- Loosen the round black knobs on the transport trolley as far as
they will go (they should pull out by approximately 1 cm);
- Fold out the transport trolley (diagram 1);
- Retighten the black knobs on the trolley (diagram 2);
• Take the robot out of the box, then the trolley;
- Make sure the fasteners used to support the trolley are towards
the rear when winding the cable (diagram 2).
I.
How to install
your CYBERNAUT
™
20
Diagram 1
Diagram 2
Diagram 3
