Zodiac BARACUDA Genius 3000, Instruction Manual

Page: 15 / 20

SECTION 5 – PROBLEM SOLVING
TOLL-FREE CUSTOMER CARE HOTLINE 0800 110 885
www.baracuda.zodiac.co.za
13
PROBLEMS CHECKS SOLUTIONS
The BARACUDA ® Is the hose long enough? Add more sections of hose.
GENIUS ® 3000 does not
reach the shallow end
of the pool or moves
in a fixed pattern.
Is the hose affected by Adjust the return outlet
the return flow? towards the bottom of the
pool to make sure that
the jet of water does not
influence the direction
of the BARACUDA
®
GENIUS ® 3000 hose.
Are the hose lengths Make sure that the hose
straight? lengths are in good condition.
Never roll up /coil hoses.
The BARACUDA ® Is there too much Check that the Auto Weir
GENIUS ® 3000 climbs suction? Valve is not blocked by
above the water level. leaves and preventing the
water from flowing through
the Auto Weir Valve.
Adjust Auto Weir Valve
setting (Refer to correct
settings page 4)
The BARACUDA ® Is there sufficient suction? Make sure the filter is clean.
GENIUS ® 3000 does not
climb the walls easily. Adjust Auto Weir Valve
setting (Refer to correct
settings page 4)
The BARACUDA ® Is the float damaged? Return to your nearest
GENIUS ® 3000 falls BARACUDA ® GENIUS ® 3000
on its one side. to your Dealer for checking.
Is the cassette unit Remove cassette unit
swivelling freely? from main body and rinse
both to flush out debris.
Is the hose weight Remove the hose weight.
attached?