Page 4
ENGLISH
Zodiac
®
Baracuda
®
1500 Automatic Aboveground Pool Cleaner
|
Owner’s Manual
Installation
Prepare the Pool
Inspect the interior of the pool. If the liner is brittle, has wrinkles, root or metal corrosion from the
underside, or damage to the supporting base or walls, do not install the cleaner until a qualified
professional makes any necessary repairs.
1. Manually vacuum the pool if excessive debris is evident,
and make sure the pool filter and pump basket are clean.
2.
Adjust the return lines to blow down-
ward to break up surface circulation and
ensure complete cleaning coverage
.
• Loosen the fitting lock ring
• Redirect the eyeball downward
• Retighten the lock
If the return fitting cannot be adjusted,
the fitting must be replaced
with a Zodiac
return line diverter (part #W90155 for 2 in. or
#W24100 for pools without return fittings) .
Assemble the Cleaner
Stretch the disc over the foot pad
with the word “TOP” facing up. The
disc should fit securely in the groove
and rotate freely on the pad.
For US/Mexican installations, slide the
wheel deflector onto the end of the hose
that attaches to the cleaner.
Assemble the Hose
For corner or end installations, connect enough
hose to reach the farthest point of the pool and
then add one (1) more section.
For center installations, connect enough hose to
reach the farthest point of the pool and then add
two (2) more sections.
1 Hose
Section
Skimmer
Skimmer
2 Hose
Sections
Skimmer
or Wall
Vacuum
Line
