Page 21
AquaLink
®
M8 | Installation Manual
Page 20
AquaLink
®
M8 | Installation Manual
4.2 OneTouch
™
Reset and Display
Messages
4.2.1
Restarting the System
MENU/HELP > SYSTEM SETUP > CLEAR MEMORY >
CONTINUE > FINAL WARNING > CONTINUE
To remove all labeling, programming, assignments
and temperature settings, highlight MENU/HELP and
press SELECT. Highlight SYSTEM SETUP and press
SELECT. Highlight CLEAR MEMORY and press
SELECT. Highlight CONTINUE and press SELECT.
Use the UP or DOWN button to highlight YES or NO
and press SELECT. There will be about a 15 second
delay before you see the FINISHED screen. Highlight
CONTINUE and press SELECT to return to the
SYSTEM SETUP.
4.3 Variable Speed Pump Menu
NOTE
This equipment may not be part of your system.
Please check with your installer.
The VAR SPEED PUMP menu is used to select the
variable speed pump type (Jandy
®
ePump™ DC, Jandy
ePump™ AC, Pentair
®
IntelliFlo
®
VF, Pentair IntelliFlo
VS, or Pentair IntelliPro
®
VS) and to select the various
pump settings. To interface the IntelliPro VS, select
IntelliFlo VS.
4.3.1
To select the Pump Type
To select a pump, highlight the desired model and press
SELECT. An X will appear next to the selection. To
control the IntelliFlo VS, select the IntelliFlo VS.
MENU/HELP > SYSTEM SETUP > VAR SPEED PUMP > SELECT
MODEL >SELECT JANDY EPUMP/INTELLIFLOVS/INTFLOVF/
INTELLIPRO
In SYSTEM SETUP menu, highlight VAR SPEED
PUMP and press SELECT, highlight PUMP MODEL
and press SELECT. Use the UP/DOWN arrow keys to
highlight the desired pump, then press SELECT.
4.3.2
To set up the Pump Application
The AquaLink can control up to 4 variable speed
pumps. In the PUMP SETUP menu the user can select
each pump (1-4) and configure how the pump(s) are to
be used. For example if the pump is to be used for pool/
spa filtration then you would select FILTRATION as the
pump application. If the pump is to be used for a water
feature then you would select AUX. PUMP as the pump
application. The default setting is NOT INSTALLED.
COMBO
POOL SPA
ONLY
DUAL EQUIP-
MENT
FILTRATION
FILTRATION
POOL PUMP
AUX. PUMP
AUX. PUMP
SPA PUMP
NOT INSTALLED
NOT INSTALLED
AUX. PUMP
NOT INSTALLED
If the system is not going to control a variable
speed pump then leave the application set to NOT
INSTALLED. If the system is going to control a
variable speed pump, then you would set the application
accordingly. In the example below we are telling the
system that it will be controlling one (1) variable speed
pump.
MENU/HELP > SYSTEM SETUP > VSP SETTINGS > SELECT
PUMP APPLICATION > SELECT PUMP1 > SELECT ITEM
In VSP SETTINGS menu, highlight PUMP
APPLICATION and press SELECT, highlight PUMP1
and press SELECT. Use the UP/DOWN arrow keys
to highlight the item, then press SELECT. An X will
appear next to the selection.
4.3.3
To set SCALE/MIN-MAX Parameters
This screen allows the user to set a global minimum and
maximum speed or flow for the indicated pump. The
SCALE setting is fixed to RPM for the Jandy ePump
and the Pentair IntelliFlo VF. The SCALE setting is
fixed to GPM for the Pentair IntelliFlo VF.
MENU/HELP > SYSTEM SETUP > VSP SETTINGS > SELECT
MIN-MAX SETTINGS > SELECT PUMP1 > CHOOSE LIMIT
In VSP SETTINGS menu, highlight MIN-MAX
SETTINGS and press SELECT, highlight PUMP1
and press SELECT. Use the UP/DOWN arrow keys to
highlight the desired LIMIT, then press SELECT.
4.3.4
To set Pump Speed
There are eight (8) default speed presets for each
variable speed pump.
MENU/HELP > SYSTEM SETUP > VSP SETTINGS > SELECT
SPEED/LABELS > SET SPEEDS> CHOOSE SPEED
In VSP SETTINGS menu, highlight SPEED/LABELS
and press SELECT, highlight PUMP1 and press
SELECT. Use the UP/DOWN arrow keys to highlight
SET SPEED and press SELECT. Use the UP/DOWN
arrow keys to highlight the desired item, then press
SELECT. Use the UP/DOWN arrow keys to highlight
the desired speed preset, then press SELECT. Use the
UP/DOWN arrrow keys to adjust the speed value, then
press SELECT.
NOTE
The FREEZE PROTECT speed is also set from
this menu.
4.3.5
To re-label the Speed Preset
Each of the eight (8) speed presets has a label and each
of those labels can be changed from the default value.
MENU/HELP > SYSTEM SETUP > VSP SETTINGS > SELECT
SPEED/LABELS > LABELS SPEEDS> CHOOSE ITEM > SELECT
GENERAL LABELS/CUSTOM LABELS
In the SPEED SETTINGS menu, highlight LABEL
SPEEDS and press SELECT. Use the UP/DOWN