ZMC464 Hardware Manual Version1.3
4
Chapter I Controllers Introduction
ZMC is the abbreviation of network motion controller model launched by ZMOTION
technology.
ZMC464 series controller supports EtherCAT bus connection, the fastest refresh cycle
is 100μs (within 16 axes), and supports linear interpolation of up to 64 axes,
interpolation of circular, spherical, electronic cam, electronic gear, synchronous
following, virtual axis setting etc. Real-time motion control can be realized by using
optimized network communication protocol.
One Computer can link with up to 256 ZMC controllers.
1.1 Connection Configuration
Typical Connection Configuration
The controller supports ETHERNET, USB, CAN, 485 and other communication
interfaces. Input, output or axis can be extended through CAN bus. (Resistance of 120
Ω is required between CANL and CANH).
ZMC motion controller supports save and read data through U disk (except ZMC0XX
series).
