ECI3828 Network Motion Control Card User Manual V1.5
Item
High Speed Output (OUT0-3)
Low Speed Output (OUT4-15)
Output mode
NPN Leakage type, it is 0V when there is output.
Frequency
＜
400kHz
＜
8kHz
Voltage level
DC24V
DC24V
Max output current
+300mA
+300mA
Max leakage current
when off
25μA
25μA
Respond time to
conduct
1μs (resistive load typical value)
12μs
Respond time to close
3μs
80μs
Overcurrent protection
Support
Support
Isolation method
optoelectronic isolation
optoelectronic isolation
Note:
The times in the form are typical based on the resistive load, and may change when the load
circuit changes.
Due to the leak-type output, the shutdown of the output will be obviously affected by the
external load circuit, and the output frequency should not be set too high in the application.
For high-speed output, it is recommended to be lower than 400KHz, for low-speed output, it
is recommended to be lower than 8HKz. If there needs higher speed, please contact us to
adjust parameter or custom hardware.
→
Wiring Reference
Summary of Contents for ECI3828
Page 1: ......
