12
Connect your door / window sensors
Access your Snap PT's Device Settings and select the
"Accessories" option. Select the icon to add an
+
accessory. Remove the plastic tab from your sensor,
and follow the in-app instructions to complete pairing.
Remove the film to expose the adhesive on the bracket,
and install sensors as shown below. Please make sure
that the two portions of the sensor are no more than
2cm apart.
1
2
Window Sensor
Position
Door Sensor
Position
Make the Preset Settings
When the door / window sensor has been successfully
added, access Snap PT's Device Settings, select the
"Preset Setting" page and press the option.
+
1
Select the door / window sensor that you want to
configure. Using the preview image, rotate the camera
to the desired position, and complete the rest of the
steps. Name the preset, and press "Save" to save the
settings.
2
Summary of Contents for Snap PT
Page 1: ...Snap PT Quick Start Guide...
