25
names, but the basic operation is the same. Take the Netgear WGR614v9
router
’s port forwarding for example.
To set up an IP camera where the Gateway IP is 192.168.1.1, the IP camera
local IP address is 192.168.1.50, and the port is 80.
First, enter the gateway address into
your address bar, and click “Enter” on the
keyboard as shown below:
This will
bring you to your router’s login screen. You will then enter your router’s
username and password, which are generally different from the wireless key.
The default login for most Netgear routers is
“admin” for the user name and
password for the password.
Once logged into the router click 'Port Forwarding/Port Triggering ' in the left
hand column.
Inside of the port forwarding section, click ‘Add Custom Service’
