23
Once the fields have been filled out, you will first
click “submit” and then “test”
to verify that the email is sending properly. If the test fails, then you will want to
verify the settings and try again.
6.1.12
FTP Service Settings
These settings work in conjunction with the alarm settings in order to upload an
image to your FTP server any time your camera detects motion. The settings
for this area will be specified by your FTP server.
6.1.13
Alarm Service Settings
This section specifies the alarm settings for the camera as shown below:
There are two different methods for triggering the alarm. The first method is
motion detection
. The sensitivity of motion detection can be adjusted
according to your requirements. The higher the number is, the lower sensitivity
is. Another method is the alarm input, which when connected, will trigger the
alarm through an alarm input signal which connects to
“I/O Alarm” port on the
back of the camera.
Using either method, when the alarm is triggered, you have three options. One
is I/O linkage upon the alarm trigger, which sends a signal through the output
portion of the I/O alarm terminal to connect with an external audio alarm to
sound a siren; the second is email notification, which send an email with an
image capture of the motion; the last is upload image upon the alarm trigger,
which uploads an image to your FTP server. Stay consistent with the
