ZSSC5101
Evaluation Kit Description
Kit Description
April 17, 2015
© 2015 Zentrum Mikroelektronik Dresden AG
— Rev. 1.00
All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the
prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.
20 of 25
4.7.
“Digital Out” Tab
Th
e “Digital Out” tab displays an XY plot for which the X-axis represents the angle and the Y-axis represents the
output value (the ramp). To generate a graph,
click the “Read” button and slowly rotate the magnet over the full
angle range
. The label on the button changes to “Stop.”
Note that this display is cleared and refreshed automatically while in
“Read” mode. To freeze the screen, click the
“Stop” button.
Values shown in the display fields in the “Min/Max Values” section are determined over each period: 180° for
AMR or 360° for GMR/TMR sensors.
Figure 4.15
“Digital Out” Screen