TSic LABkit™ User Manual and Technical Description
TSic
TM
LABkit, Rev.2.4, Oct. 18, 2005
Page 11 of 18
© ZMD AG & IST AG, 2005
All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior
written consent of the copyright owner.
6 Sensors for the TSic LABkit
TM
, Sensor Connection Cable and Connector
6.1
Standard Cables
•
Adaptor with TSic™ 306 E-Line Sensor Type
•
Length: 3 ft / 1m
•
Maximum temperature: 80°C
•
Blocking capacitor: 100nF connected close to the sensor between VDD and GND
Note:
If the standard cable requires an extention, add it on the connector side of the cable to minimize the
distance between the blocking capacitor and the sensor.
Order Number
for sensor with cable
TEFÜ-TSIC306-IST
Sensor
TSic™ 306
Temperature Range
with delivered cabeling
-20°C to 80°C
(Short-term temperature
strain: -50°C to 120°C)
Protection
Sensor enameled
Connection Cable
PVC connection wire, 3ft (1m)
4-pole, unshielded, t
max
80°C
Connector
3-pole, nylon connector,
soldered, crimped, connectors
not shrunken
Pin
V+ (VDD) yellow
DATA
green
GND
white
