Zmartgear ZMG060, Manual

Page: 11 / 16

1) If you need to use the scheduled
charging function, press the button
for 3 seconds to enter the scheduled
charging interface when it’s in
standby status. Also press button for 3 seconds to exit the
scheduled charging interface.
2)After entering the scheduled charging interface, press the button
once to reserve one hour, and accept Max 8hours scheduled time
.
After confirming the appointment time, stop the button operation
and the system will automatically enter the countdown state. Then
insert the plug to the vehicle to wait charging .
3)If you need to terminate the appointment status, pull out the
power supply and power on again!
2.3 Mechanical Properties
Instructions and Status Display
The operation steps are as follows:
Step 1: Connect with the power, the control box starts to be
energized, the blue light bar is always on, and the screen will
display the gear and status.
Step 2: Press the “Ampere button” to set charging current.
Step 3: Schedule charging function
Article Specification
CEE 16/32A PLUG
AC charging plug
Control box
EV Charging Plug
EV Charging Cable
5000 times
10000 times
Meet: UL94 LV: V-0
Meet: UL94 LV: V-0
Meet: UL1581 LV: VW-1
Meet: IEC/EN 62752:2016
Meet: IEC/EN 62752:2016
Meet: IEC/EN 62752:2016
Life of plug-in
and plug-out
Flammability
EV rolling test
Cable Deflection
Drop
Note
：
Plug-in and plug-out test is under no-load condition
2.4 Product Function
Specification Article
Output current
Leakage Protection
（
AC 30mA+DC 6mA
）
Under voltage protection
Over voltage protection
Over temperature protection
Over current protection
Short circuit protection
Screen display
Schedule charging
Surge protection
EFT
6A/8A/10A/13A/16A/20A/32A
Support
Support
Support
Support
Support
Support
Support
Support
Support
Support
Ampere button
Countdown