Back Panel Description
Shown below are the components on the back of Inverter.
Figure 2 Back Panel
①
DC Input Connector (Battery Terminal)
②
Input Fuse
③
AC Input Receptacle
④
Output Receptacle(s)
⑤
Input Voltage Range Selector : (Input voltage range is defined in
specification chapter, and output voltage is the same as input voltage in
mains mode)
A. Select
‘
Narrow
’
setting for general electrical appliance: If you select
this mode, the Inverter operating voltage in Line mode is within
170~280Vac (90~145Vac) with the same output voltage. The line
sensitivity is higher. Hence, you can connect the computer systems or
other precision home equipment when you select this mode.
B. Select
‘
Wide
’
setting to save energy: If you select this mode, the
Inverter operating voltage in Line mode will be extended within
90~280Vac (50~145Vac) with the same output voltage. The Inverter is
with the lower line sensitivity. Moreover, there will be taking a long transfer
○
2
Summary of Contents for IG500-12-C
Page 1: ...USER MANUAL...