12
Using th
e Cooktop
OPERATION
USING BOOST FUNCTION - RCIND-36 / RCIND-30
Activate the Boost function
Touch the heating zone BOOST control and the indication shows “P”.
Cancel the Boost function
Touch BOOST again or touch the “—” control to cancel the Boost function, and select the
level you want to set.
Power down
Power up
OR
NOTE: The Boost function can only last for 5 minutes, after which the zone will decrease to
level 9 automatically.
USING YOUR COOKTOP - RCIND-24
After powering on, the buzzer will beep once and all the indicators light up for 1 second
then go out, indicating the cooktop has entered standby mode.
Touch the ON/OFF switch, all the indicators show “– “
Place a suitable pan on the cooking zone that you wish to use. Make sure the bottom of
the pan and the surface of the cooking zone are clean and dry.
Touch the heating zone selection control, and an indicator
next to the key will flash. Select a heat setting by touching the “-” “+”
control.
• If you don’t choose a heat setting within 1 minute, the cooktop will automatically
switch off.
• You can modify the heat setting at any time during cooking.
Power down
Power up
