20
Tr
oublesh
ooting
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
The dishwasher
won’t start
Power supply or power line is
not connected
Check and connect power supply
Delay start option has been
selected
Refer to delay start section in this
manual
Rinse Aid light
is on
Display screen shows “LSb”
Add rinse aid
Dishwasher
operates too
long
The dishwasher is connected to
cold water
Make sure the dishwasher is
connected to hot water
The cycle time will vary
according to soil level
The cycle will increase based on
soil level
The sanitize option is selected
The cycle will increase when using
sanitize
Dishes are not
clean enough
Water pressure is temporarily
low
Try again when water pressure is
normal
The inlet water temperature is
low
Make sure hot water is connected
Dishes are loaded too close
together
Re-load dishes according to this
user manual
The selected cycle is not suitable
for soil condition
Choose another cycle with a longer
wash time
Spray arms are blocked
Unblock spray arms
Dishes are not
drying
Rinse aid dispenser is empty
Fill rinse aid dispenser
Improper dish loading
Re-load dishes according to
manual
The chosen cycle does not
include drying
Choose a different cycle with
drying
Spots and film
on dishes
Water is too hard
Install water softener
Improper dish loading
Re-load the dishes
Rinse aid is expired
Use fresh rinse aid
Rinse aid dispenser empty
Add rinse aid
Etching on
glasses
Too much detergent
Use less detergent
Inlet water temp exceeds 158°F Lower inlet water temp
Detergent left
in dispenser
Detergent may be too old
Clean out the dispenser and
replace with new detergent
Spray arm is blocked
Inspect and clean the spray arm
water jet holes as necessary
